Eltima Serial Port Terminal

$ 39.95, EUR 35.95

Shareware

2.4 MB

ELTIMA Software GmbH

Description of Eltima Serial Port Terminal 5.0:
The main purpose of Eltima Serial Port Terminal is to establish connection to serial port and send/receive various types of data down the serial line. Eltima Serial Port Terminal is a session-based, multi-purpose application that provides simple communication interface to connect to any serial port device (modem/fax/GPS/mouse/printer and so on).
Eltima Serial Port Terminal allows you to open as many serial ports as you like (including virtual serial ports); dynamically change serial port settings without necessity to close and reopen current port; adjust baudrate, databits, parity, stop bits, flow control parameters; save all received bytes into a file for later analysis and lots more. Being a session-based, Eltima Serial Port Terminal allows creation of options set and saving them under individual session names for different hosts.
Unlike other terminals you may not only send, but also receive and view data in hexadecimal format, switch between dump and terminal view modes, etc, which could be very useful for debugging and testing serial port connections.

Supported OS: Windows 98, Windows Me, Windows NT, Windows 2000, Windows XP, Windows 2003

System Req: - Processor: Pentium II class at least 200 MHz; - RAM: 64 MB; - OS: Windows 98, NT4, Me, 2000, XP, 2003;

232Analyzer

Serial Port Terminal Monitor Tester Converter: RS232 RS485 RS422 TTL Modbus PLC

Serial Port Terminal

Use Serial Port Terminal to connect to remote computer using null-modem, send or receive various types of data over serial line, redirect data into specified file, monitor data exchange between serial devices, troubleshoot modem settings and more.

Virtual Serial Ports Driver CE

Virtual Serial Ports Driver for Windows CE creates two pure virtual serial ports in your system which are virtually connected to each other. For other Windows applications they are seen exactly as two real serial ports with null-modem connection.

Virtual Serial Port Driver XP4

Using Virtual Serial Port Driver XP4 you can create virtual serial COM port pairs which are virtually connected to each other via virtual null-modem cable and for other Windows applications seen as real serial ports connected via null-modem cable.

Network Serial Port Kit

Network Serial Port Kit allows you to connect any serial port devices over TCP/IP network or Internet. Program creates and connects up to 254 virtual serial ports at a time. Physical COM ports can be connected over the network as well.

Serial Port ActiveX Control

Serial Port ActiveX Control is a powerful component that lets developers quickly and effectively work with serial port. Use Serial Port component to easily communicate with external devices on RS232 connection, such as modems, bar code readers, PBX and

Serial Port Redirector

Connect a serial application to a remote TCP socket. This allows you to utilize modern hardware COM servers without changing your software or exchange data between a TCP/IP application and an old-fashioned program that doesn't support TCP/IP.

Shared Serial Ports

Shared Serial Port allows you to share real serial ports between multiple applications. All applications will be able to receive data from real serial port simultaneously, as well as send data to it.

Multiport.USB

There is a number of the equipment controlled through a serial port from a PC or a terminal. Also there is a lot of the technologies in the market allowing to operate remotely the consecutive devices through the network TCP/IP. These solutions contain

datAxe TCP IP serial data converter

datAxe is a flexible converter to solve all needs between serial data and TCP/IP on Windows computers. datAxe makes serial data from your PC available on TCP/IP networks and makes TCP/IP data available on physical and virtual serial ports of your PC.